You need hopper tanks for several purposes, whether it’s a gravity unload, the need for a complete cleanout, wet bins, load out bins, or feed bins. GSI offers a complete line of hopper tanks and accessories to meet your needs. We have Flex-Flo, aeration, R&P gates and over 300 models of hopper tanks.
BFT
Bulk Feed tanks, or BFT’s, are a great way to store and protect feed. BFT’s feature a sealed roof and hopper body design to protect grain/feed from moisture and offer easy unloading.
SEALED ROOF
Weather tight connection of the roof to the sidewall prevents moisture from entering the bin, keeping your feed protected from moisture.
60 DEGREE HOPPER
To easily unload heavy materials , including feed, a 60⁰ hopper with truss head bolts prevent the material from being caught up on hardware and causing bridging events.
DRIP-LIP
Our drip lip is a one-of-a-kind, roll-formed bottom sheet edge that forces water away from running down the hopper and the lower boot area, keeping water away from the tank seams.
LID
Cap opens a full 180 degrees to prevent any interference with fill equipment. GSI’s standard ground control kit allows you to safely open and close the lid from the ground.
OPTIONS
FLEX-FLO
Tubing and augers are available in four sizes and five models with capacities up to 220 lbs/minute. Regardless of whether you’re moving feed, crumble feed, mash, high-moisture, or pellets, we have the Flex-Flo your operation requires.
PNEUMATIC FILL
Filling your bins pneumatically allows you to go taller without worry of being restricted by the capabilities of the feed delivery truck. GSI offers preconfigured pneumatic fill kits for BFT lids.
MULTIPLE UNLOAD OPTIONS
GSI offers a variety of unloader systems, including twin, tandem, and twin tandem systems, as well as the accessories for each to customize the hopper tank to your needs.
GHT
Designed to handle dry free flowing grain, the GHT fits the needs of small capacity ranges with the increased strength of a grain bin roof.
GRAIN BIN ROOF
Our grain bin roof features a 3” tall rib with over and under lap profiles ensures a precise fit. 3 bend rib profiles are also incorporated in the new design for increased strength to stand up even in the harshest environments.
GALVANIZED SUB STRUCTURE
A galvanized sub structure provides strength to support the tank and protects this foundation from the elements for years of reliable service.
DRIP-LIP
Our drip lip is a one-of-a-kind, roll-formed bottom sheet edge that forces water away from running down the hopper and the lower boot area, keeping water away from the tank seams.
SEALED ROOF
Weather tight connection of the roof to the sidewall prevents moisture from entering the bin, keeping your feed protected from moisture.
MULTIPLE DISCHARGE SIZES
The standard discharge opening of 16”. Looking to support a higher capacity? GSI offers openings up to 22” to support higher capacity load-out needs.
STURDY ACCESS LADDERS & CAGES
GSI high-strength ladders have roll-formed sides and stamped rungs to eliminate rung spin. Each rung has a dimpled tread surface for improved tread while climbing.
FCHT
Featuring a stiffened sidewall and 4” corrugation, the FC Hopper Tank is designed to handle higher capacities with a 45⁰ hopper for use as a wet bin or load out bin. The FCHT pairs well with a GSI portable dryer to create an efficient grain system.
GRAIN BIN ROOF
Our grain bin roof features a 3” tall rib with over and under lap profiles ensures a precise fit. 3 bend rib profiles are also incorporated in the new design for increased strength to stand up even in the harshest environments.
WIDE FLANGE I-BEAM SUB STRUCTURE
Wide flange I-Beam sub structure has the strength and durability to support the heavy loads of hopper tanks year after year. Our sub structure is customizable to meet your specific clearance needs and can be designed to your wind and seismic requirements.
OPTIONS
MULTIPLE HOPPER ANGLES
Your storage and unload requirements vary, that’s why we have 40, 45, and 60 degree angles to handle almost any need.
MULTIPLE DISCHARGE SIZES
While the standard discharge opening is 12”, GSI offers openings up to 23” to support higher capacity load-out needs.
FLASHING KIT
An optional flashing kit allows for a smooth transition for grain from the sidewall of the bin to the hopper, preventing material hang-ups during unloading.
NCHT
Designed for those applications where routine clean-out is required, the NCHT is a heavy- duty hopper tank for either wet or dry grain, or for some specialty applications. NCHT hopper tanks are available in 40 degree, 45 degree, and 60 degree hoppers to meet many different requirements.
GRAIN BIN ROOF
Our grain bin roof features a 3” tall rib with over and under lap profiles ensures a precise fit. 3 bend rib profiles are also incorporated in the new design for increased strength to stand up even in the harshest environments.
WIDE FLANGE I-BEAM SUB STRUCTURE
Wide flange I-Beam sub structure has the strength and durability to support the heavy loads of hopper tanks year after year. Our sub structure is customizable to meet your specific clearance needs and can be designed to your wind and seismic requirements.
FULLY STIFFENED BIN DESIGN
Stiffeners on the sidewall provide increased strength and durability to stand up to the demands of frequent usage.
OPTIONS
MULTIPLE HOPPER ANGLES
Your storage and unload requirements vary, that’s why we have 40, 45, and 60 degree angles to handle almost any need.
SPECIAL APPLICATIONS AVAILABLE
GSI can design to your seismic needs. We can also help with your specific application needs with tailored options.
MULTIPLE DISCHARGE SIZES
While the standard discharge opening is 12”, GSI offers openings up to 23” to support higher capacity load-out needs.
WIDE FLANGE I-BEAM SUB STRUCTURE
Wide flange I-Beam sub structure has the strength and durability to support the heavy loads of hopper tanks year after year. Our sub structure is customizable to meet your specific clearance needs and can be designed to your wind and seismic requirements.